How To Replace Toner In Brother Mfc-l2750dw

Brother strongly recommends that customers apply simply 18-carat Brother drum units and/or toner cartridges. Each Brother light amplification by stimulated emission of radiation printer is designed to piece of work at pre-set temperatures that are matched exactly to each of our individual toner formulations. Each individual component is designed to work with the other to ensure quality and reliability. Using non-Brother supplies may affect the hardware performance, impress quality, and auto reliability. The Brother express warranty does not utilise to whatsoever problem that is caused by the use of third party drum units, toner cartridges, or toner.

TN1030 Standard Yield toner cartridge: approximately i,000 pages*

*Pages refer to A4 or Letter of the alphabet-size single-sided pages. Estimate cartridge yield is declared in accord with ISO/IEC 19752.

Note:

- It is a good idea to keep a new toner cartridge fix for utilize when you see the "Toner Low" warning.

- If yous print graphics, bold text, charts, web pages with borders, or other types of printouts that consist of more than simple text, the corporeality of toner used will increment.

- If you change the print density setting for lighter or darker printing, the amount of toner used will modify.

- Wait to unpack the toner cartridge until immediately before y'all put it in the machine.

Follow the steps below to install a new toner cartridge.

ane. Make sure the machine is powered on. Leave the automobile on for at to the lowest degree 10 minutes to cool downwardly.

2. Open the pinnacle embrace.

iii. Take out the pulsate unit and toner cartridge assembly past pulling on the handle in the eye of the drum unit of measurement and toner cartridge assembly.

NOTE: We recommend that y'all identify the drum unit and toner cartridge assembly on a piece of paper in case you accidentally spill or scatter toner.

WARNING: Afterward you have just used the auto, some internal parts of the automobile will be extremely hot. Wait for the automobile to cool down before y'all touch the internal parts of the automobile.

4. Push downwardly the bluish lock lever on the right side of the drum unit of measurement and toner cartridge associates and so elevator the toner cartridge out of the drum unit of measurement.

Note: Handle the toner cartridge carefully. If toner scatters on your hands or clothes, immediately launder information technology off with cold water.

Alert:

- DO NOT put a toner cartridge or a toner cartridge and pulsate unit into a fire. It could explode, resulting in injuries.

- DO NOT employ flammable substances, any type of spray, or an organic solvent/liquid containing alcohol or ammonia to clean the inside or outside of the machine. Doing so could cause a fire. Instead, use only a dry, lint-free cloth.

- Be careful not to inhale toner.

NOTE: To avoid print quality issues, Exercise NOT bear upon the shaded parts shown below.

NOTE:

- Be sure to seal up the toner cartridge tightly in a suitable purse so that toner pulverization does not spill out of the toner cartridge.

- Become to https://www.brother.ca/en/environment for instructions on how to render your used consumable items to the Blood brother drove plan. If you cull not to return your used consumable, please discard the used consumable according to local regulations, keeping it separate from domestic waste. If yous accept questions, call your local waste disposal office.

5. Unpack the new toner cartridge.

6. Pull off the protective cover.

7. Put the new toner cartridge firmly into the drum unit until you hear it lock into place. If you put information technology in properly, the blue lock lever will elevator automatically.

8. Clean the corona wire inside the drum unit of measurement by gently sliding the green tab from left to right and right to left several times. Be sure to return the tab to the home position, if yous do not, printed pages may have a vertical stripe.

9. Put the drum unit of measurement and toner cartridge assembly back in the machine.

10. Shut the top cover. After replacing the toner cartridge, Practise NOT plow off the machine'southward power switch or open the tiptop cover until the toner error is no longer displayed.

Source: https://support.brother.ca/app/answers/detail/a_id/126903/~/how-do-i-install-or-replace-the-toner-cartridge%3F